PR-1000 In-line Process Refractometer Package-
from $4552.50 (depending on options)
PR-111 In-Line Process Refractometer
SM-2 Smart Meter
NEMA 4X Enclosure
The PR-1000 In-Line Process Refractometer can continuously monitor and control the concentration of dissolved solids or soluble liquids giving you a temperature compensated reading which can be easily correlated to percent solids, or percent concentration.
The versatile PR-1000 refractometer comes standard with a 4-20 mA output which allows you to record and automatically control your critical process.
The PR-1000 refractometer's small size and easy setup procedure can start saving you money right away!
Price: From $4552.50
|Stainless steel sensing head with sapphire prism
|Inert to essentially all liquids over the operating temperature range of the unit.
|High intensity visible LED light source
|Long life. Low maintenance. Maximum uptime for your process line.
|Silicon detector in sensing unit
|State of the art for accuracy and dependability.
|Built in AGC loop
|Compensates for LED aging, guaranteeing maximum accuracy.
|NEMA 4 head and console
|Water tight and drip proof for safety and long life.
|4-20 mA output
|Send to a chart recorder or use to automatically control and adjust your process.
|0-100% Analog Display Meter
|Easily correlated to your specific monitoring requirements. Be, S.G., Brix, etc.
|Easy user controlled calibration and temperature compensation capability
|Allows you to tailor calibration and compensation to your specific process.
|110/220 VAC input power
|No special wiring required. Can be used nearly everywhere.
|1" Sensing head
|Can be used in a wide variety of process lines. Adapters for any size process lines can be built to your specifications.*
* Adapters are not included in the base price of the PR-111 and are priced separately based on individual requirements. We will need a sketch and/or description of your desired adapter mounting. We can provide a spool adapter with tri-clamps for pipe applications, doughnut for pan application or whatever is required for your particular application.
|0-95 Brix Equivalent or <1.3330 to >1.5325 Refractive Index
|Maximum Recommended 60 Brix or Equivalent Refractive Index
Minimum Recommended 1 Brix or Equivalent Refractive Index
|Plus or Minus 5% of Span
|Typically better than 1% of Span
|Plus or Minus 1% of Span
|-30 to 250 degrees Fahrenheit
|+/- 30 degrees F. from customer selected nominal
between 0 and 250 degrees F.
Greater ranges available at extra cost.
|Standard Sensor Head Dimensions
|Power Consumption PR-111.............2.72 Watts @ 120 VAC
|Power Consumption w/ SM-2 Smart Meter...........3.80 Watts @ 120 VAC
24 VAC 9-18VDC 18-36VDC 120VAC 240VAC